Every day you must undertake a milk system clean on your JURA machine, which is an essential maintenance process
If you neglect to clean your milk system every day, you may encounter issues with a consistent milk delivery. Your milk frother can become clogged with congealed milk, resulting in the machine "spitting" milk instead of dispensing it smoothly.
Fortunately, milk spitting doesn't require the assistance of an engineer. Usually, a thorough clean of your milk frother is all that's needed.
Your milk system clean will take around 3 minutes and the process can't be interrupted - so remember to start at a time that won't be too inconvenient for users
X6 / JX8
Cleaning the milk system
End of every day - 3 minutes
1. Before starting the Clean Milk System program,
please remove the drip tray and drain any
contained water away, before reinserting the
drip tray back in to the machine.
2. Click the ‘P’ button and select ‘Clean Milk
System’.
3. Set the clear plastic Cleaning Tray on drip tray.
4. Squeeze a single dose of milk cleaning granules
into larger section of the Cleaning Tray.
5. Connect milk pipe from the spout to the
Cleaning Tray.
6. Follow instructions on display.
7. Meanwhile; empty, clean and rinse steel milk
pail, steel tube and rubber connector from
fridge (if using Cool Control 1L or 2.5L).
8. Empty and rinse the Cleaning Tray after use.
------------------------------------------------------------------------------------------------------------------
GIGA X3 / GIGA X3c / GIGA X8 / GIGA X8c
Cleaning the milk system
End of every day - 3 minutes
1. Before starting the Clean Milk System program,
please remove the drip tray and drain any
contained water away, before reinserting the
drip tray back in to the machine.
2. Click the ‘P’ button, Then select "Maintenance Status" by pressing the touch screen, select ‘Clean Milk System’
3. Set the clear plastic Cleaning Tray on drip tray.
4. Squeeze a single dose of milk cleaning granules
into larger section of the Cleaning Tray.
5. Connect milk pipe from the spout to the
Cleaning Tray.
6. Follow instructions on display.
7. Meanwhile; empty, clean and rinse steel milk
pail, steel tube and rubber connector from
fridge (if using Cool Control 1L or 2.5L).
8. Empty and rinse the Cleaning Tray after use.
------------------------------------------------------------------------------------------------------------------
X10
Cleaning the milk system
End of every day - 3 minutes
1. Before starting the Clean Milk System program,
please remove the drip tray and drain any
contained water away, before reinserting the
drip tray back in to the machine.
2. Press and hold the bottom right button for 3 seconds, to access the cleaning program menu
3. Select the blue “Cleaning” icon from the displayed options
4. Select the option “Clean Milk System”5. Set the clear plastic Cleaning Tray on drip tray.
4. Squeeze a single dose of milk cleaning granules
into larger section of the Cleaning Tray.
5. Connect milk pipe from the spout to the
Cleaning Tray.
6. Follow instructions on display.
7. Meanwhile; empty, clean and rinse steel milk
pail, steel tube and rubber connector from
fridge (if using Cool Control 1L or 2.5L).
8. Empty and rinse the Cleaning Tray after use.
For further support please contact us via this Support Form and raise a ticket.
https://support.amamus.coffee/knowledge/kb-tickets/new