Skip to content
English
Problem not solved? Log a support ticket here
  • There are no suggestions because the search field is empty.

Jura Error 8

Jura Error 8 indicates that the brew group has failed to complete its operating cycle

  • Perform a hard reset: Power down the machine and completely disconnect it from the wall socket. Wait for five minutes before plugging it back in and turning it on. This simple reboot is often enough to reset the brewing cycle and clear error codes caused by temporary jams.
  • Clear the waste compartments: Remove, empty, and properly reseat both the coffee grounds container and the drip tray. If the grounds bin becomes overfilled, it can create internal back pressure that stops the brew unit from successfully ejecting the used coffee.
  • Initiate a cleaning routine: If the machine is functional enough to allow it, run a standard cleaning cycle using a Jura cleaning tablet. This helps flush out compacted coffee grounds that might be restricting the brew mechanism.
  • Descale the system: Mineral buildup can create friction and resistance within the internal components. If your machine is due for descaling, run the program. While this will not repair broken mechanical parts, it can often clear up minor, borderline blockages caused by limescale.

If you have attempted this solution and the problem persists, please contact us via this Support Form or by scanning the QR code on the Amamus Assert Sticker and raise a ticket,

https://support.amamus.coffee/knowledge/kb-tickets/new