Can't switch on your JURA GIGA machine?
On the JURA GIGA X3 and X8 models the power button is hidden under a square lift-up flap on top of the machine around the rotary switch.
Either press the rear of the flap to slightly lift the front, or use a fingernail down the side to lift the flap.
The power switch is pressed once to switch on and again to switch off.
Additionally, there is a rocker power switch located at the back of the machine near the power socket. While it is not commonly used, it is important to be aware that it may accidentally get switched when cleaning the rear of the machine.
To ensure proper functioning, it is important to securely plug the power cable into the back of the machine. If the wire is accidentally pulled or knocked, it may become loose and result in the machine not powering up. Therefore, please make sure the power cable is fully inserted.
If you require further support please contact us via this Support Form and raise a ticket.
https://support.amamus.coffee/knowledge/kb-tickets/new